Current location: homepage > Central products > Isolation transformer > High potential isolation transformer >

MB Series and DGC series high potential isolation transformers

Product classification: High potential isolation transformer

Product overview: MB series transformer is a small high potential isolation transformer with epoxy resin casting winding. It is mainly used for low-voltage (low potential) circuit and high-voltage (high-voltage) circuit for low-power power conversion or pulse signal coupling. There are MB-15, mb-15j and m

Hotline: 400-778-2231

product details

MB series transformer is a small high potential isolation transformer with epoxy resin casting winding. It is mainly used for low-voltage (low potential) circuit and high-voltage (high-voltage) circuit for low-power power conversion or pulse signal coupling. The series of products are available in MB-15, mb-15j, mb-15k, mb-15x and MB-200 models. Their applicable operating environment, installation and connection mode and voltage level are different.
At present, the insulation requirements for input and output of DGC series transformers are different from those of DGC series, which are used for input and output of the same type of transformer n。

Users of this product should have basic knowledge of high voltage electrical safety. The general requirements for installation and use are as follows:
1. The product should be installed in an upright manner, and it is not allowed to hang on the side or upside down.
2. The shielding terminal and the bottom plate must be reliably connected to the ground potential.
Do not use high potential exchange terminals.
4. Sufficient electrical separation shall be reserved between high potential side and surrounding objects according to the specific situation of the site.
5. The winding surface should be kept clean to prevent or timely remove the dust and other dirt on the insulation surface.